-
Communicating 50-100 V Telecom Insulation and Continuity Tester
-
Low-voltage two-pole voltage absence testers
-
Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.
-
Digital tester with MiniFlex® flexible current sensor. AC and DC voltage up to 1,000 V. Current up to 300 A via the MiniFlex® sensor included. Automatic selection of measurement type (resistance, audible continuity, capacitance or diode). No-contact detection of live conductors (phase). Large backlit display. Removable test probes.
-
The MTX 200 Series multimeters which are simple to use for day-to-day work but also offer all the crucial functions of a multimeter: current, voltage and resistance measurements.
-
Clamps for AC leakage current from 500 µA to 400 A
-
Compact 400 A AC TRMS clamp multimeter
-
1 kV Insulation and Continuity Tester
-
Electrical installation tester compliant with the NF C 15-100 & IEC 60364-4 standards
-
Class 2 integrating sound level meter – Recording of up to 64,000 measurement points and data processing software supplied as standard – 60-hour battery life – Remote microphone with 5 m extension
-
Flexible three-phase current sensors
IP67, 1,000 V CAT IV
Measurements from 0.5 A to 3 kA
-
Specially designed for industrial applications, the CA 1727
tachometer measures the rotation speed of any moving part, remotely or
by contact.
-
A comprehensive multimeter for electrical maintenance of installations and small AC and DC machines
-
Digital voltage and continuity tester with LCD screen
Automatic AC / DC recognition for voltage
Voltage up to 1,000 V, resistance and capacitance, diode test, automatic power-off
-
Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.
-
RMS leakage current multimeter clamp
-
1 kV Insulation and Continuity Tester
-
Compact multifunction electrical installation tester – All the measurements stipulated by the NF C 15-100 & FD C 16-600 standards
-
Watertight portable conductivity meter,
For checking the quality of water
-
Earth tester offering selective earth, soil resistivity, earth coupling, ground potential, continuity, resistance and pylon earth measurements (with the C.A 6474)
-
Resistance, earth coupling, continuity, resistivity and selective earth measurements
-
Four instruments in one - Earth resistance - Soil resisitivity - Continuity and earth coupling
-
Digital earth and resistivity tester up to 2,000Ω in site case with built-in battery
-
Digital earth and resistivity tester up to 2,000 Ω in site case
-
Loop resistance and inductance measurements, leakage current measurements – clamping diameter 35 mm - programmable alarms - display of earth voltage – storage of measurements - communication
-
Loop resistance and inductance measurements, leakage current
measurements – clamping diameter 35 mm - programmable alarms - display
of earth voltage – storage of measurements
-
200 A digital micro-ohmmeter in a rugged,
waterproof on-site casing. Programmable test current from 20 A to 200 A. Resistance
from 0.1 μΩ to 1 Ω. Storage of up to 8,000 measurement
results. DataView software for data processing.
-
10 A micro-ohmmeter - Measurement from 1 µΩ to 2,500 Ω - Max. resolution 0.1 µΩ - Automatic discharge after test
-
10 A micro-ohmmeter - Wide measurement range from 5 μΩ to 400 Ω
-
When coupled with the C.A 6472 tester, the C.A 6474 adapter can be used to check, measure and analyse the earthing of pylons (selective measurement with Ampflex flexible current sensors).
-
Compact instrument ideal for preventive maintenance - Battery tests: Nickel/Cadmium, Lithium-ion , Nickel/metal hybrid, Lead/Acid batteries
-
Locate hidden circuits
-
5 MHz function generator, ideal for education, technical training and R&D, control and production technicians.
-
Digital ratiometer for transformers
-
Benchtop digital oscilloscope, 2 x 100 MHz channels
-
Benchtop digital oscilloscope, 2 x
25 MHz channels